The communication tower belongs to a type of signal transmission tower, also called a signal transmission tower or a signal tower. The main function supports signal transmission and supports the signal transmitting antenna. Uses mobile/unicom/traffic satellite positioning system (GPS) and other communication departments. Our daily life is inseparable from the communication tower, so what is the installation specification of the communication tower? Let’s talk about it in detail. Communication tower installation specification: The tower design communication tower has passed the trial. The tower design communication tower has been accepted. The company is fully equipped with assembly records. When the communication tower is installed, the tools must be complete, and the engineers and field operators need to be in place. Before the communication tower is installed, the supervisors shall examine and approve the construction organization design or construction plan and safety measures of the underwriting unit, and the plans that do not meet the requirements shall be re-programmed or revised.
When installing the communication tower, it is necessary to ensure the stability of the structure and the permanent non-deformation of the material.
Installed in the signing must check the construction of the communication tower according to the arranged drawings, to ensure that there is no problem in quality, and install according to the pre-assembled qualified records.
Check whether the root opening and the base root opening of the communication tower are the same. During the installation of the communication tower, the verticality must be verified. After the erection is completed, the actual axis and design axis deviation of the communication tower should not be greater than the height of the tower body, and the local curvature should not be greater than The length to be measured. The supervisor must check the installation of the communication tower according to the communication tower design documents, supervise the construction unit to ensure the installation process of the communication tower, the verticality of the tower body and the tilt of the central axis of the communication tower comply with the engineering design requirements and the installation of the tower. Related specifications. Regulators must strictly inspect the height of the communication tower, the height of the platform, the height and orientation of the antenna pillars in accordance with the design requirements of the communication tower to ensure compliance with the requirements, and also need to inspect the lightning protection facilities of the communication tower, and the indicators meet the requirements. Points to note about the antenna poles in the communication tower: 1. Grounding of the lightning rod: Use 4x40mm hot-dip galvanized flat iron, the welding surface should be sufficient, and the welding on all sides is required. The welding length of the flat iron and the wall lightning belt is not less than 100mm, and the anti-rust treatment is carried out. Second, the cement pier is cast straight, no honeycomb, no cracks, no ribs, and the outer brush is smooth and clean. Third, waterproof treatment: If the floor is waterproof, the coil is waterproof. Waterproof materials such as asphalt can be used for cement and asphalt floors.